新固态硬盘分成四个区后我把系统迁移过去，迁移完后其它三个区不见了，怎么办？
发布网友
发布时间：2022-04-23 05:06
共4个回答
热心网友
时间：2023-10-15 19:02
我的电脑右键-管理-磁盘管理-黑色为未分配右键分区
热心网友
时间：2023-10-15 19:02
这样的话，还是右击此电脑，选择管理，选择磁盘管理，看看你现在的分区情况。
热心网友
时间：2023-10-15 19:02
Tools: win10 methods as follows: 1, the first solid-state hard disk into the chassis. Go to download area assistant 6.2. Double Click on the mouse to install 2. Open the software after installation. Below is the main interface when it opens. You can see that disk 1 is a 1 TB mechanical hard drive, and Disk 2 is a 120 GB solid state drive 3. Select the system partition for Disk 1, and then click on the transfer system to solid state disk 4, come out a confirmation window, click on the next step 5. Choose which disk to migrate your system to in this window. Select Disk 2. Point. Next 6. In this window you can choose the size of the system disk. The default is the overall, using the default settings 7. Make the destination disk the same format as the source disk. And Click on the \"F\" to finish 8. Click on the 'submit' button in the upper left corner 9. Click on execute 10. When a window appears to prompt for a reboot, click on the 'something' button 11. The system is rebooting 12. reboot and automatically enter the migrated interface. The bottom line is the progress of the migration. The amount of time spent varies depending on the amount of data and the machine configuration. Usually about 10 minutes 13. It will automatically boot from the solid state disk when the migration is complete. Ten seconds into the system, faster than a little. After entering the system open disk management, you can see 120 gb of solid state disk has become a system disk. And so, the migration was successful.\",\"speak_url\":{\"speak_url\":\"/audiofrom=zh&to=en&voice=2&cate=speakUrl&key=0d27dd40ee1dbf57bbf59bf9b77365c2&query=工具：win10 方法如下： 1、先把固态硬盘装入机箱。再到网上下载分区助手6.2。鼠标双击安装。 2、安装完成后打开软件。下图是打开后的主界面。可看到磁盘1是1TB的机械硬盘，磁盘2是120G的固态硬盘。 3、选择磁盘1的系统分区，再点击左侧的“迁移系统到固态磁盘”。 4、出来一个确认窗口，点击“下一步”。 5、在这个窗口选择把系统迁移到哪个磁盘。选择磁盘2。点“下一步”。 6、在这个窗口可以选择系统盘的大小。默认是全盘，采用默认设置。 7、把“让目标磁盘与源磁盘的格式保持相同”勾选上。再点“完成”。 8、点击左上角的“提交”。 9、点击“执行”。 10、出现提示要重启的窗口，点击“是”。 11、系统正在重启。 12、重启后自动进入迁移的界面。最下面一行是迁移的进度。耗费的时间根据数据多少和机器配置不同而有些差异。一般10分钟左右。 13、迁移完成后会自动从固态盘启动。10秒就进入了系统，快了不止一点点。进系统后打开磁盘管理，可以看到120G的固态盘已经变成系统盘了。至此，迁移成功。\",\"tSpeak_url\":\"/audiofrom=zh&to=en&voice=2&cate=tSpeakUrl&key=d2652c407f3d880e15995613c4f14aed&query=Tools: win10 methods as follows: 1, the first solid-state hard disk into the chassis. Go to download area assistant 6.2. Double Click on the mouse to install 2. Open the software after installation. Below is the main interface when it opens. You can see that disk 1 is a 1 TB mechanical hard drive, and Disk 2 is a 120 GB solid state drive 3. Select the system partition for Disk 1, and then click on the transfer system to solid state disk 4, come out a confirmation window, click on the next step 5. Choose which disk to migrate your system to in this window. Select Disk 2. Point. Next 6. In this window you can choose the size of the system disk. The default is the overall, using the default settings 7. Make the destination disk the same format as the source disk. And Click on the \"F\" to finish 8. Click on the 'submit' button in the upper left corner 9. Click on execute 10. When a window appears to prompt for a reboot, click on the 'something' button 11. The system is rebooting 12. reboot and automatically enter the migrated interface. The bottom line is the progress of the migration. The amount of time spent varies depending on the amount of data and the machine configuration. Usually about 10 minutes 13. It will automatically boot from the solid state disk when the migration is complete. Ten seconds into the system, faster than a little. After entering the system open disk management, you can see 120 gb of solid state disk has become a system disk. And so, the migration was successful.","speak_url":{"speak_url":"/audiofrom=en&to=zh&voice=2&cate=speakUrl&key=7cbe67602ce82cdf63362654ac821c68&query=Tools: win10 methods as follows: 1, the first solid-state hard disk into the chassis. Go to download area assistant 6.2. Double Click on the mouse to install 2. Open the software after installation. Below is the main interface when it opens. You can see that disk 1 is a 1 TB mechanical hard drive, and Disk 2 is a 120 GB solid state drive 3. Select the system partition for Disk 1, and then click on the transfer system to solid state disk 4, come out a confirmation window, click on the next step 5. Choose which disk to migrate your system to in this window. Select Disk 2. Point. Next 6. In this window you can choose the size of the system disk. The default is the overall, using the default settings 7. Make the destination disk the same format as the source disk. And Click on the \"F\" to finish 8. Click on the 'submit' button in the upper left corner 9. Click on execute 10. When a window appears to prompt for a reboot, click on the 'something' button 11. The system is rebooting 12. reboot and automatically enter the migrated interface. The bottom line is the progress of the migration. The amount of time spent varies depending on the amount of data and the machine configuration. Usually about 10 minutes 13. It will automatically boot from the solid state disk when the migration is complete. Ten seconds into the system, faster than a little. After entering the system open disk management, you can see 120 gb of solid state disk has become a system disk. And so, the migration was successful.\",\"speak_url\":{\"speak_url\":\"/audiofrom=zh&to=en&voice=2&cate=speakUrl&key=0d27dd40ee1dbf57bbf59bf9b77365c2&query=工具：win10 方法如下： 1、先把固态硬盘装入机箱。再到网上下载分区助手6.2。鼠标双击安装。 2、安装完成后打开软件。下图是打开后的主界面。可看到磁盘1是1TB的机械硬盘，磁盘2是120G的固态硬盘。 3、选择磁盘1的系统分区，再点击左侧的“迁移系统到固态磁盘”。 4、出来一个确认窗口，点击“下一步”。 5、在这个窗口选择把系统迁移到哪个磁盘。选择磁盘2。点“下一步”。 6、在这个窗口可以选择系统盘的大小。默认是全盘，采用默认设置。 7、把“让目标磁盘与源磁盘的格式保持相同”勾选上。再点“完成”。 8、点击左上角的“提交”。 9、点击“执行”。 10、出现提示要重启的窗口，点击“是”。 11、系统正在重启。 12、重启后自动进入迁移的界面。最下面一行是迁移的进度。耗费的时间根据数据多少和机器配置不同而有些差异。一般10分钟左右。 13、迁移完成后会自动从固态盘启动。10秒就进入了系统，快了不止一点点。进系统后打开磁盘管理，可以看到120G的固态盘已经变成系统盘了。至此，迁移成功。\",\"tSpeak_url\":\"/audiofrom=zh&to=en&voice=2&cate=tSpeakUrl&key=d2652c407f3d880e15995613c4f14aed&query=Tools: win10 methods as follows: 1, the first solid-state hard disk into the chassis. Go to download area assistant 6.2. Double Click on the mouse to install 2. Open the software after installation. Below is the main interface when it opens. You can see that disk 1 is a 1 TB mechanical hard drive, and Disk 2 is a 120 GB solid state drive 3. Select the system partition for Disk 1, and then click on the transfer system to solid state disk 4, come out a confirmation window, click on the next step 5. Choose which disk to migrate your system to in this window. Select Disk 2. Point. Next 6. In this window you can choose the size of the system disk. The default is the overall, using the default settings 7. Make the destination disk the same format as the source disk. And Click on the \"F\" to finish 8. Click on the 'submit' button in the upper left corner 9. Click on execute 10. When a window appears to prompt for a reboot, click on the 'something' button 11. The system is rebooting 12. reboot and automatically enter the migrated interface. The bottom line is the progress of the migration. The amount of time spent varies depending on the amount of data and the machine configuration. Usually about 10 minutes 13. It will automatically boot from the solid state disk when the migration is complete. Ten seconds into the system, faster than a little. After entering the system open disk management, you can see 120 gb of solid state disk has become a system disk. And so, the migration was successful.","tSpeak_url":"/audiofrom=en&to=zh&voice=2&cate=tSpeakUrl&key=7cbe67602ce82cdf63362654ac821c68&query=Tools: win10 methods as follows: 1, the first solid-state hard disk into the chassis. Go to download area assistant 6.2. Double Click on the mouse to install 2. Open the software after installation. Below is the main interface when it opens. You can see that disk 1 is a 1 TB mechanical hard drive, and Disk 2 is a 120 GB solid state drive 3. Select the system partition for Disk 1, and then click on the transfer system to solid state disk 4, come out a confirmation window, click on the next step 5. Choose which disk to migrate your system to in this window. Select Disk 2. Point. Next 6. In this window you can choose the size of the system disk. The default is the overall, using the default settings 7. Make the destination disk the same format as the source disk. And Click on the \"F\" to finish 8. Click on the 'submit' button in the upper left corner 9. Click on execute 10. When a window appears to prompt for a reboot, click on the 'something' button 11. The system is rebooting 12. reboot and automatically enter the migrated interface. The bottom line is the progress of the migration. The amount of time spent varies depending on the amount of data and the machine configuration. Usually about 10 minutes 13. It will automatically boot from the solid state disk when the migration is complete. Ten seconds into the system, faster than a little. After entering the system open disk management, you can see 120 gb of solid state disk has become a system disk. And so, the migration was successful.\",\"speak_url\":{\"speak_url\":\"/audiofrom=zh&to=en&voice=2&cate=speakUrl&key=0d27dd40ee1dbf57bbf59bf9b77365c2&query=工具：win10 方法如下： 1、先把固态硬盘装入机箱。再到网上下载分区助手6.2。鼠标双击安装。 2、安装完成后打开软件。下图是打开后的主界面。可看到磁盘1是1TB的机械硬盘，磁盘2是120G的固态硬盘。 3、选择磁盘1的系统分区，再点击左侧的“迁移系统到固态磁盘”。 4、出来一个确认窗口，点击“下一步”。 5、在这个窗口选择把系统迁移到哪个磁盘。选择磁盘2。点“下一步”。 6、在这个窗口可以选择系统盘的大小。默认是全盘，采用默认设置。 7、把“让目标磁盘与源磁盘的格式保持相同”勾选上。再点“完成”。 8、点击左上角的“提交”。 9、点击“执行”。 10、出现提示要重启的窗口，点击“是”。 11、系统正在重启。 12、重启后自动进入迁移的界面。最下面一行是迁移的进度。耗费的时间根据数据多少和机器配置不同而有些差异。一般10分钟左右。 13、迁移完成后会自动从固态盘启动。10秒就进入了系统，快了不止一点点。进系统后打开磁盘管理，可以看到120G的固态盘已经变成系统盘了。至此，迁移成功。\",\"tSpeak_url\":\"/audiofrom=zh&to=en&voice=2&cate=tSpeakUrl&key=d2652c407f3d880e15995613c4f14aed&query=Tools: win10 methods as follows: 1, the first solid-state hard disk into the chassis. Go to download area assistant 6.2. Double Click on the mouse to install 2. Open the software after installation. Below is the main interface when it opens. You can see that disk 1 is a 1 TB mechanical hard drive, and Disk 2 is a 120 GB solid state drive 3. Select the system partition for Disk 1, and then click on the transfer system to solid state disk 4, come out a confirmation window, click on the next step 5. Choose which disk to migrate your system to in this window. Select Disk 2. Point. Next 6. In this window you can choose the size of the system disk. The default is the overall, using the default settings 7. Make the destination disk the same format as the source disk. And Click on the \"F\" to finish 8. Click on the 'submit' button in the upper left corner 9. Click on execute 10. When a window appears to prompt for a reboot, click on the 'something' button 11. The system is rebooting 12. reboot and automatically enter the migrated interface. The bottom line is the progress of the migration. The amount of time spent varies depending on the amount of data and the machine configuration. Usually about 10 minutes 13. It will automatically boot from the solid state disk when the migration is complete. Ten seconds into the system, faster than a little. After entering the system open disk management, you can see 120 gb of solid state disk has become a system disk. And so, the migration was successful.
热心网友
时间：2023-10-15 19:03
使用U盘PE重做系统：
1、在别的机器上制作一个U盘PE，使用U大师来做。百度U大师，去官网下载二合一版，安装后插入U盘制作。下载一个系统镜像，如win7位系统，百度秋叶系统，进入官网，下载后复制到U盘里。
2、U盘插在这台电脑上，开机进入BIOS，设置为U盘启动，进入第二项PE系统。
3、备份您硬盘上所需要的数据，之后打开分区软件，重新给硬盘分区（不分区，直接格式化C盘），再把系统装在C盘。
4、重启电脑，拔掉U盘，等待系统安装完成。安装好系统后，马上安装杀毒软件查杀病毒。
